Hey All,
I've recently been given a Galaxy Gear as a gift/freebie as they upgraded to the Apple Watch (UK Version, I'm in the USA), and me being me, figured I'd do what I do with all my phones, see if I can root, custom rom, etc.
I've done the research, learning about Android Vs Tizen and also the null_23 rom (which looks very appealing to be honest).
So, rooting and customizing most of phones, didn't think this would be a problem, but for the life of me, I can't get moving forwards on this, so before I brick it (as I've only had it 24 hours) I figured I'd turn to the knowledgeable :)
I have tried using ADB, I can boot it into download and recovery using that, I've tried using Odin 3.09 to install 'null_03_TWRP2.7.tar.md5' recovery, ready for the 'null_ 23.zip' rom, but, the only way into 'download' mode is from ADB, if I try the 'rebooting' then 6 power button presses and choose 'download' it just reboots into the gear, not download. So I then I read up somewhere that it needed to be rooted, so I tried to use 'Impactor_0.9.14.zip' to do that, even following the instructions, didn't seem to work. All this didn't allow the 'recovery' image to take and be used.
I've tried to connect with the two versions of Kies, I've tried 'Unified_Android_Toolkit_v1.4.4.exe' I've tried 'Wondershare MobileGo ' I've tried different USB ports. Once I've had it on the screen providing me with the code (looks like a MAC ID) asking me to trust it, etc. When it goes into sleep mode, I have to pull the usb and reconnect to dectect it again. I have enabled debug mode (going into the system and hitting software version, I think it was, 10 times)
I believe I've done everything I should be doing, but it doesn't want to work, and I don't want to brick it.
The details on the system info are as follows. (from Unified_Android_Toolkit_v1.4.4)
DEVICE INFORMATION
==================
Product Manufacturer: samsung
Product Model: SM-V700
Model ID:
Device Type: ls02
Device Characteristics: default
Build Description: ls02xx-user 4.2.2 JDQ39 V700XXUBNC1 release-keys
Build Date: Mon Mar 17 20:01:53 KST 2014
Hardware: smdk4x12
Board Platform: exynos4
Build Version Release: 4.2.2
Build ID: JDQ39
Bootloader: V700XXUBNC1
Build PDA: V700XXUBNC1
CSC Sales Code: BTU
Region Code: GB
Ro.secure Level: 1
Ro.adb.secure Level: 1
Selinux.enforce Level:
Selinux Level:
Alarm Alert: Walk_in_the_forest.ogg
Notification Sound: Notification1.ogg
Ringtone: Ringtone1.ogg
------------------------------------------------------------------------------------
Boot Image Status is: SECURE [based on ro.secure value]
Note: This is only an indictation if the boot image files have been modified
------------------------------------------------------------------------------------
Can anybody please help me, maybe there is a step I'm missing, maybe I'm looking at too many tutorials, I just don't know.
I've recently been given a Galaxy Gear as a gift/freebie as they upgraded to the Apple Watch (UK Version, I'm in the USA), and me being me, figured I'd do what I do with all my phones, see if I can root, custom rom, etc.
I've done the research, learning about Android Vs Tizen and also the null_23 rom (which looks very appealing to be honest).
So, rooting and customizing most of phones, didn't think this would be a problem, but for the life of me, I can't get moving forwards on this, so before I brick it (as I've only had it 24 hours) I figured I'd turn to the knowledgeable :)
I have tried using ADB, I can boot it into download and recovery using that, I've tried using Odin 3.09 to install 'null_03_TWRP2.7.tar.md5' recovery, ready for the 'null_ 23.zip' rom, but, the only way into 'download' mode is from ADB, if I try the 'rebooting' then 6 power button presses and choose 'download' it just reboots into the gear, not download. So I then I read up somewhere that it needed to be rooted, so I tried to use 'Impactor_0.9.14.zip' to do that, even following the instructions, didn't seem to work. All this didn't allow the 'recovery' image to take and be used.
I've tried to connect with the two versions of Kies, I've tried 'Unified_Android_Toolkit_v1.4.4.exe' I've tried 'Wondershare MobileGo ' I've tried different USB ports. Once I've had it on the screen providing me with the code (looks like a MAC ID) asking me to trust it, etc. When it goes into sleep mode, I have to pull the usb and reconnect to dectect it again. I have enabled debug mode (going into the system and hitting software version, I think it was, 10 times)
I believe I've done everything I should be doing, but it doesn't want to work, and I don't want to brick it.
The details on the system info are as follows. (from Unified_Android_Toolkit_v1.4.4)
DEVICE INFORMATION
==================
Product Manufacturer: samsung
Product Model: SM-V700
Model ID:
Device Type: ls02
Device Characteristics: default
Build Description: ls02xx-user 4.2.2 JDQ39 V700XXUBNC1 release-keys
Build Date: Mon Mar 17 20:01:53 KST 2014
Hardware: smdk4x12
Board Platform: exynos4
Build Version Release: 4.2.2
Build ID: JDQ39
Bootloader: V700XXUBNC1
Build PDA: V700XXUBNC1
CSC Sales Code: BTU
Region Code: GB
Ro.secure Level: 1
Ro.adb.secure Level: 1
Selinux.enforce Level:
Selinux Level:
Alarm Alert: Walk_in_the_forest.ogg
Notification Sound: Notification1.ogg
Ringtone: Ringtone1.ogg
------------------------------------------------------------------------------------
Boot Image Status is: SECURE [based on ro.secure value]
Note: This is only an indictation if the boot image files have been modified
------------------------------------------------------------------------------------
Can anybody please help me, maybe there is a step I'm missing, maybe I'm looking at too many tutorials, I just don't know.
Download from this link
No comments:
Post a Comment